Here you can order custom laser etched 19mm push buttons. You can put text or a logo/symbol in the middle only. Would you have any special instruction or request, you will be able to enter them separate. If we have any question we will get in touch with you before doing any etching. These buttons comes with a pigtail connector for easy wiring and feature a replaceable micro switch. They have a flat surface and the led move with the button so they are easy to press in. What’s more? They are available with RGB LED for endless possibility!
The 19mm button only have a 13mm middle surface area to engrave. Text is limited to 8-10 character per line and a maximum of 2 line. We do all of our etching in capital letter but if you have any special request we will do them. Due to their design we can’t add text on the outer part of this button; if you are looking to get custom engraved outer text on your buttons we suggest that you have a look at the 22mm or 25mm models.
We will gladly etch your custom logo but you need to provide us with a black and white image as we can’t process and trace colored image. The button will be etched where your graphic is black unless otherwise stated. We can work with most format; JPG, PNG, SVG, DXF, PLT. Make sure you have legal rights and permission to use the file you upload to us and that it is not under any copyright. If you want a logo or text we offer on another button size, just send us the product link in the “Special Instruction” field.
These buttons comes with 5 different LED color choice. The LED have independant pin on the button; they can be wired to light with your parking light, when you press the button or just about any configuration you can think of. If you are unsure about which pin does what, take a look at the wiring diagram page.
These model also comes in RGB; if you want a red, a blue or a green button you will be getting an RGB LED button. You will have the choice of these 3 color down the road. The RGB LED share a common anode which mean they are inter-connected to a positive (+12vdc) pin and you must connect to ground the color you want to light. More informations on the RGB LED can be found on the wiring diagram page. Each LED color pin is clearly identified on the buttons.
- 19mm (3/4″) Hole
- 22mm Face Diameter – 13mm Button Diameter
- 16mm Push Diameter
- IP67 Rating
- Pigtail Connector with 150mm (6″ long) wire
- 12VDC LED (White and Orange not polarity sensitive, RGB Common Anode)
- 5A Current Rating
- 10mm (3/8″) Maximum Panel Thickness
- 50mm (2″) Depth Including Pigtail
- Black Housing Material; Anodized Aluminum
- Chrome Housing Material; Stainless-Steel