Here you can order custom laser etched 22mm push buttons. You can put text or a logo/symbol in the middle and also add text on the outer top and bottom portion. Would you have any special instruction or request, you will be able to enter them separate. If we have any question we will get in touch with you before doing any etching. These buttons comes with a pigtail connector for easy wiring and feature a replaceable micro switch. They have a flat surface and the led move with the button so they are easy to press in. What’s more? They are available with RGB LED for endless possibility!
The 22mm button have a 13mm middle surface area to engrave. Middle text is limited to 8-10 character per line and a maximum of 2 line. We do all of our etching in capital letter but if you have any special request we will do them.
We will gladly etch your custom logo but you need to provide us with a black and white image as we can’t process and trace colored image. The button will be etched where your graphic is black unless otherwise stated. We can work with most format; JPG, PNG, SVG, DXF, PLT. Make sure you have legal rights and permission to use the file you upload to us and that it is not under any copyright. If you want a logo or text we offer on another button size, just send us the product link in the “Special Instruction” field.
These buttons comes with 5 different LED color choice. The LED have independant pin on the button; they can be wired to light with your parking light, when you press the button or just about any configuration you can think of. If you are unsure about which pin does what, take a look at the wiring diagram page.
These model also comes in RGB; if you want a red, a blue or a green button you will be getting an RGB LED button. You will have the choice of these 3 color down the road. The RGB LED share a common anode which mean they are inter-connected to a positive (+12vdc) pin and you must connect to ground the color you want to light. More informations on the RGB LED can be found on the wiring diagram page. Each LED color pin is clearly identified on the buttons.
- 22mm (7/8″) Hole
- 25mm Face Diameter – 13mm Button Diameter
- 16mm Push Diameter
- IP67 Rating
- Pigtail Connector with 150mm (6″ long) wire
- 12VDC LED (White and Orange not polarity sensitive, RGB Common Anode)
- 5A Current Rating
- 10mm (3/8″) Maximum Panel Thickness
- 50mm (2″) Depth Including Pigtail
- Black Housing Material; Anodized Aluminum
- Chrome Housing Material; Stainless-Steel
ANTONIO M. (verified owner) –
Alex (verified owner) –
William Rutherford (verified owner) –
Buttons are great quality. I used them to replace the ones on an espresso machine I’m restoring.
Brad Arceneaux (verified owner) –
Anthony (verified owner) –
SCOTT VANCIL (verified owner) –
Olivier (verified owner) –
Fast shipping, great packaging and superior quality products! A+
DAVID DOYLE (verified owner) –
kenneth (verified owner) –
Ivar Hestnes (verified owner) –
As expected. Top product!
PAUL kILSDONK (verified owner) –
Peter De jong (verified owner) –
Ian S. (verified owner) –
It was exactly what I wanted
Rakan Balharith (verified owner) –
Emanuel G. (verified owner) –
Ken Lumpkin (verified owner) –
Edward P. (verified owner) –
Made a custom button to my exact drawing. I’m extremely impressed by the quality of the switch and my overall experience with Custom Billet Buttons.
Karl (verified owner) –
Michael Paulman (verified owner) –