Sealed Weatherproof Automotive 12V Relay

We now stock waterproof 12V 5-Pin relay that are ideal when you need to mount a relay outside of the cabin, in an off-road application or in a boat. They are sealed from both ends and comes with 16AWG coil control wire and heavy 14AWG power wire. They also comes with a mounting bracket. Pigtails wire are about 5″ long.

Specifications;

• 12 VDC Coil
• Water Proof
• Standard 5 Pin Configuration
• Rated for 40A*
• Pigtail and Mounting Bracket Included

* The relay is rated for 40A, while the socket 14AWG wires are not big enough for the rated 40 amps.
If you are intending to run 30+ amps continuously, you could remove the spade contacts from the connector, carefully open the crimps
securing the wire to the contact and recrimp/solder 10 gauge wires to it. Also, you can use 6.3 mm female connectors
to connect directly to the relay pins. For high current device, a Solid State Relay mounted on a heat sink should be considered.